Tilbake til annonser
Torget
E-flite Umx Extra 300 3d Bnf
Related Ads

E-flite Umx Extra 300 3d Bnf

Tøff elektromodell fra E-Flite som veier lave 32.5 gram.

Modellen har vingespenn på 42,7cm og leveres BNF.

Dette betyr at modellen kun kan brukes av de som har en radio med DSM2-modulasjon ( Spektrum DX5i, DX6e, DX7 osv ).

Key Features An ultra micro thats ideal for indoor 3D flight Completely built and flight ready?just bind to any DSM2? aircraft transmitter with dual rates and expo Includes a Li-Po flight battery and DC Li-Po charger Small and light enough for experienced pilots to fly almost anywhere indoors Overview The Ultra Micro eXtreme (UMX) Extra 300 3D makes the dream of a 3D plane you can fly almost anywhere a reality.

With a flying weight of barely over an ounce (just 33 grams), battery and all, it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room.

Its ingenious laser-cut foam airframe, designed by ETOC champ Seth Arnold, makes it all possible.

The structure uses a fraction of the foam material usually used in profile planes of this type and is covered with micro-thin film.

The airframe is reinforced with carbon fiber rods that keep flexing and twisting to a minimum so you can fly the most aggressive 3D maneuvers with absolute precision.

Optional Side Force Generators are also included.

These razor-thin pieces of foam slide onto the leading edge of the wing and enhance rudder authority in knife-edge flight.

They improve tracking during precision aerobatics too.

The UMX? Extra 300 3D BNF comes completely assembled with a punchy 8.5mm coreless brushed motor and Spektrum? AR6400L Ultra Micro DSM2 Receiver/ESC installed.

Built-in long-throw servos on the AR6400L drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons.

A 1S 3.7V 150mAh Li-Po battery and DC Li-Po charger are also included.

For best performance, a DSM2 aircraft transmitter with dual rates and expo is recommended.

Needed to Complete A 4+ Channel DSM2 compatible Transmitter.

A programmable transmitter capable of dual rates and exponential is highly recommended.

Wingspan: 16.8 in (427mm) # Overall Length: 19.4 in (494mm) # Wing Area: 74 sq in (4.8 sq dm) # Flying Weight: 1.2 oz (32.5g) # Motor Size: 8.5mm Coreless Brushed # Trim Scheme Colors: Red, Grey,

Clear, Black # Prop Size: 130mm x 70mm # Recommended Battery: 3.7V 1-Cell 150mAh LiPo # Approx.

Flying Duration: 4-8 minutes # Scale: Ultra Micro # Minimum Age Recommendation: 14 years # Experience Level: Advanced # Recommended Environment: Indoor/Outdoor # Is Assembly Required: No

Price: kr 998,-

Opprettet på: 09:09 AM Opprettet av: Elefun AS
Rediger Beskrivelse | Behandle bilder | Administrere kategorier
Reply to ad
Popular Ads